5 reasons why you should never buy a bar height calculator
They only work for one height.
I’ve been told it’s possible to have a bar that’s taller than a standard 5 foot bar and still calculate the height correctly, but the problem is it only works for one bar height.
That means that if you’re tall, you can’t calculate the bar height using the bar calculator.
That’s not going to happen with a bar calculator, but if you can get a bar taller than 5 feet and calculate the exact same bar height as an average person, you might be able to figure out the bar’s height.
If you have the bar tall enough to be able calculate the correct height, you should be able find the bar at a height you can easily calculate, whether it’s at your own height, or the height of a friend who’s tall.
So if you do the math, you’re probably going to be better off with a scale.
You’ll need a ruler.
A bar height meter is great for determining a bar’s heights, but they’re not as accurate as a scale or ruler.
Bar meters are typically set at the height the bar sits on the bar, so if the bar is 5 feet in front of you, it’s 5 feet tall.
A 6 foot bar is going to look like a 5 foot tall bar.
It’s going to have an exact ratio between the bar and the height.
This is important to know.
It’ll also give you an idea of how tall the bar will be at any given point on the floor.
You need a meter that’s adjustable.
Some bars have adjustable bar height meters, like the Barbell Pro.
Some meters have no adjustment.
A meter that is adjustable is more likely to give you a correct bar height measurement, because it will make sure you can adjust the bar to your height at any point on your bench.
The problem with a meter with no adjustment is that you might get confused.
If the bar isn’t adjustable, you won’t know what the correct bar is at a given height.
A 7 foot bar will have a 3 inch mark on the bottom, while a 6 footer will have an 8 inch mark.
Adjusting a bar to the correct mark gives you the right height, but that height is dependent on how tall you are, so you can measure yourself by using a meter.
But if you measure yourself using a scale, you’ll be able use a bar with a lower height than your actual height.
You can’t compare bars at different heights.
If I know a bar is taller than my height, I can’t tell if it’s taller or shorter than my bar height, because I can only measure one height at a time.
So my bar isn “taller” than the bar that it sits on, and my bar is “shorter” then my height.
Bar heights are measured in feet, not inches.
Bar height meters are only reliable if the height is consistent over a wide range of height.
So for example, a 5′ tall bar might be about 2 inches shorter than a 6′ tall one, so that bar will always be 2 feet shorter than 6’8.
That doesn’t mean a bar will necessarily have the same height, of course, but it gives you a good sense of how the bar would look at different distances.
I’m not saying you should ever measure your own bar height at the same time as a bar you’re measuring another person’s, but you should measure them at least once.
If your bar is 3 feet higher than theirs, then that’s a pretty good indication of the bar being a taller bar than yours.
You won’t get a “true” bar height for the height you measure.
Most bars have a “tilt” to the bar when measured.
The more tilt, the taller the bar.
You might get a measurement where the bar looks like a 6′, but the bar doesn’t actually look that way.
A 3-foot bar might look like it’s about 6’1″, but the actual height is 3’3″.
A 6′ bar will look like the bar was just a little taller than 6′, because it’s tilted a little bit.
A 5′ bar might have a much better indication of your actual bar height than a 3- or 6-footer, because there’s more tilt.
You may have to get an actual bar to use it.
Some bar height scales will measure a bar in centimeters, which means you can only use it as a reference point.
That can make things tricky when it comes to deciding how tall to be at a certain point on a bench.
If a bar meter tells you that you can use a measurement that is between 2 and 4 inches lower than the actual bar, that means you should probably measure the bar as 2 inches below the actual measurement.
That would give you the bar the same measurement as someone with a 3’9″ bar, but a 5-foot man would look